tloaelehileng carbide lekolilo le le leng le le leng la ka hare coolant Liboro tsa sethunya

Tlhaloso e Khutšoanyane:

Ho phunya lithunya ka ntlha e le 'ngoe (eo mona moo ho thoeng ke ho phunya lithunya) ho sebelisoa ho sebetsa masoba a tebileng a bophara ba Φ1~40mm le tekanyo ea bolelele ho isa ho bophara ba makhetlo a 100~250.Hajoale ke eona feela mokhoa oa ho sebetsana le masoba a tebileng a bophara ba bophara ba Φ1~6mm.Ho nepahala ha masoba a machining ho ka tsitsisoa ho IT 8~10, 'me batho ka bomong ba ka fihla IT6~7;bokaholimo bo ka tsitsa ho Ra12.5~3.2μm (▽3~▽5), 'me batho ka bomong ba ka fihla Ra0.8~ 0.4μm (▽7~▽8), ho otloloha ha lesoba ho ka fihla ho 0.05mm/ m.Lisebelisoa tsa lithunya li na le mefuta e mengata ea lisebelisoa.Ntle le ho sebetsana le lisebelisoa tse tloaelehileng tsa tšepe le li-castings, li ka boela tsa sebetsa litšepe tse bonolo, litšepe tsa alloy, litšepe tse sa hloekang le litšepe tse thibelang mocheso.


Lintlha tsa Sehlahisoa

Carbide tip brazed single flute Gundrilling bit metal ho phunya Deep Hole Gundrilling carbide gun Drill Bit

Li-tag tsa Sehlahisoa

e5e4c789






  • E fetileng:
  • E 'ngoe:

  • ke hobane'ng ha u re khetha?

    1.Taolo ea boleng: lisebelisoa tsohle tsa rona li feta tlhahlobo e nepahetseng pele e romelloa.re na le 10 sete tlhahlobo mochini.

    Theko ea 2.Manufacture: Rea etsa, litheko tsohle ke theko ea feme, theko ea tlholisano.

    3.Ka potlako araba: Potso ea hau e amanang le lisebelisoa tsa rona, re tla u araba ka mor'a lihora tse 24.

    4. OEM & ODM e amohetse: Re ka hlahisa lisebelisoa ho latela setšoantšo sa hau.

    5.Tshireletso ea sebaka sa hau sa thekiso, maikutlo a moralo le lintlha tsohle tsa hau tsa lekunutu.
    Ts'ebeletso ea ho 6.Gun drill e molemo ka ho fetisisa

    Boholo:

     

    Bophara ba ntlha(mm) Carbide bolelele(mm) Bolelele ba ho sila(mm) Mamello(mm)
    3.02 24.23 21 ±1
    4.02 26.25 23 ±1
    5.02 28.64 25 ±1
    6.02 34 30 ±1
    7.02 34 30 ±1
    8.02 38 33 ±1
    9.02 38 33 ±1
    10.02 37.8 34 ±1
    11.02 37.8 34 ±1
    11.52 37.8 32 ±1
    12.02 37.8 33 ±1
    12.52 37.8 33 ±1
    13.02 37.8 32 ±1
    14.02 42.5 36 ±2
    15.02 48.6 38 ±2
    16.02 48.6 38 ±2
    17.02 47.8 36 ±2
    18.02 47.8 34 ±2
    19.02 47.8 34 ±2
    20.02 47.8 33 ±2
    21.02 56.5 44 ±3
    22.02 58.8 45 ±3
    23.02 58.8 45 ±3
    24.02 60 45 ±3
    25.02 61.8 45 ±3
    26.02 62.6 45 ±3
    27.02 62.4 45 ±3
    28.02 63.3 45 ±3
    29.02 64 45 ±3
    30.02 65 45 ±3

     

     

     

    Sebopeho sa rona:

    1. Re Kopanyo ea Indasteri le Khoebo ea tlhahiso ea tungsten carbide series product, Wideest product range, Best production capabilities, Best quality control, Best Service, Competitive price;


    2. 100% tlhahlobo ea QC pele e romelloa;

    3.Feedback nakong ea lihora tse 24 le Puisano e Ntle ea Senyesemane;

    Litheko tsa kantle tsa koetliso tse ntle tsa 4.Good li ka fana ka tlhahiso ea litsebi mabapi le sehlahisoa;

    5.Ho etsa ka mokhoa o ikhethileng ho latela lipampiri tsa hau tsa ho taka;

    6.Amohela taelo ea teko le taelo e nyane;

    7.Amohela lipehelo tsohle tsa tefo tsa T/T, L/C, western union, Paypal,Trade Assurance, joalo-joalo;

    8.Fana ka mehlala ea mahala tlas'a boemo ba thepa e lefuoang ke moreki;

    9.Survey Imeile ea tšebeliso ea lihlahisoa e tla romelloa ka nako ho mamela maikutlo a hau, sepheo sa rona ke ho leka ho etsa hore moreki e mong le e mong a khotsofale mme rona mahlakore ka bobeli WIN-WIN!

    deepholemachinery15 deepholemachinery14 deepholemachinery13 deepholemachinery12 deepholemachinery11 deepholemachinery10 deepholemachinery9

     

    Ho romelloa ka potlako:

    Mechini e tebileng8

    deepholemachinery7

    Sephutheloana:

    deepholemachinery5 deepholemachinery4

    Setoko se seholo:

    deepholemachinery3 deepholemachinery2

    Lintlha tsa Khampani

    Dezhou Drillstar Cutting Tool Co., Ltd ke moetsi le morekisi oa lisebelisoa tse tebileng tsa ho cheka mekoti ho kenyelletsa ho cheka lithunya, lithunya tsa lithunya, BTA, Trepanning, lisebelisoa tse tenang, lisebelisoa tsa ho honing joalo-joalo, hammoho le lisebelisoa tsa lisebelisoa.Re boetse re aba oli e sehang, grinder ea seha, pompo ea ho fafatsa oli e felletseng lebaleng la ho cheka mekoti e tebileng.Re ikakhetse ka setotsoana ho rala lihlahisoa ho latela litekanyetso tsa boleng ba machabeng tse hlophisitsoeng hantle ho fana ka tlhahiso e ntle le boleng ho bareki. Ho qala ka selemo sa 2010, re nkile sebaka se matla 'marakeng oa lehae mme hape re fumane bareki ba bangata South East Asia. , Europe le ba bang.Re mofani oa tharollo ea One-Stop bakeng sa lisebelisoa tse tebileng tsa ho itšeha. Ho phaella ho sena, re barekisi ba thepa ea Tungsten Carbide Tips & Rods le lisebelisoa tse ling tse tala tse tsoang Europe le USA.

     deepholemachinery1

    LBH:

     Q1: Tiisetso ea lihlahisoa tsa tungsten carbide ke eng?

    A1: Re na le mochini o phahameng o nepahetseng oa maemo ho laola litekanyo tsa geometry le ho sebelisa substrate ea boholo bo botle ba lijo-thollo e koahetsoeng ka liphahlo tse phahameng tsa ts'ebetso ho netefatsa bophelo ba lihlahisoa tsa rona, tse ka khotsofatsang boemo bo bong le bo bong ba ts'ebetso. Haeba mathata leha e le afe a boleng lehlakoreng la rona a etsahetse nakong ena , re tla nka litšenyehelo tsa ho romella le ho fetola.

    Q2: Na u fana ka mehlala ea mahala?

    A2: E, hangata re fana ka mehlala ea mahala bakeng sa tlhahlobo tlas'a boemo ba thepa e lefuoang ke moreki.

    Q3: Tlhoko ea hau e tlase ea odara ke efe?

    A3: Re tla bontša MOQ bakeng sa ntho ka 'ngoe leqepheng la quotation.Re amohela mohlala le taelo ea teko.Haeba bongata ba ntho e le 'ngoe bo sa fihle ho MOQ, theko e lokela ho ba sampole ea theko.

    Q4: Nako ea ho fana ka lihlahisoa tsa hau ke efe?

    A4: E itšetlehile ka ho fumaneha ha thepa.Haeba lintho tse hlokahalang li le teng, nako ea ho fana e ka ba ka hare ho matsatsi a 8 a mosebetsi, empa haeba e se nako ea ho fana e ka ba matsatsi a 20 a mosebetsi.

    Q5: Na o ka etsa lihlahisoa tse nang le sebōpeho se khethehileng sa carbide?

    A5: E, re ka khona.Re ka hlahisa bobeli li-mill tse tloaelehileng le lisebelisoa tse khethehileng.Re ka li etsa ho latela litšoantšo le lisampole tsa hau.

    Q6: Na nka fuoa kemiso ea ka ea ho sebetsa ea odara?

    A6: E, re tla romela kemiso ea ho sebetsa ea odara ea hau beke le beke.Re tla hlahloba le ho lekola thepa eohle haeba ho na le likarolo tse senyehileng le tse sieo pele li romelloa.Litšoantšo tse qaqileng tsa tlhahlobo ea odara li tla romelloa ho uena bakeng sa netefatso ea hau pele o tlisoa.

    Maikutlo a hau ke tlotla ea rona e ntle ka ho fetisisa, ka kopo u se ke oa tsilatsila ho re fa maikutlo a hau a bohlokoa mme re ka etsa hore u ikutloe u itšepa haholoanyane ho k'hamphani le lihlahisoa tsa rona.

    haeba u na le bothata, pls ikopanye le nna

    skype:lilyhothair20

    mochini o tebileng

     

    Ngola molaetsa wa hao mona mme o re romele wona